CROWN INDUSTRIAL PRODUCTS CO., INC. -- 7007 COLD GALVANIZING COMPOUND; 156,020CY  -- 6850-01-053-9224
<pre>=====================  Product Identification  =====================

Product ID:7007 COLD GALVANIZING COMPOUND; 156,020CY
MSDS Date:08/10/1987
FSC:6850
NIIN:01-053-9224
=== Responsible Party ===
Company Name:CROWN INDUSTRIAL PRODUCTS CO., INC.
Address:STATE LINE RD.
City:HEBRON
State:IL
ZIP:60034
Country:US
Info Phone Num:815-648-2424
Emergency Phone Num:815-338-2141
Preparer's Name:ROBERT E. BAYTON
CAGE:92381
=== Contractor Identification ===
Company Name:CROWN INDUSTRIAL PRODUCTS CO
Address:HWY 47 N
Box:350
City:HEBRON
State:IL
ZIP:60034
Country:US
Phone:815-648-2424
CAGE:92381

=============  Composition/Information on Ingredients  =============

Ingred Name:ZINC  (SARA III)
CAS:7440-66-6
RTECS #:ZG8600000
Fraction by Wt: 51-70%
OSHA PEL:10 MG ZNO/M3
ACGIH TLV:10 MG ZNO/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 11-30%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 1-10%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:LIQUIFIED PETROLEUM GAS (PROPELLANT)
CAS:68476-86-8
RTECS #:OJ2200000
Fraction by Wt: 11-30%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM

Ingred Name:BINDER (UNSPECIFIED)

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:UNKNOWN  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Effects of Overexposure:EYE:IRRITATION SKIN:MILD IRRITATION/DRYING
    INHAL: DIZZINESS,NAUSEA, ANESTHESIA INGEST:NOT LIKELY, CAN CAUSE
    VOMITING, ABDOMINAL PAIN
Medical Cond Aggravated by Exposure:MYOCARDIAL IRRITATION. AVOID
    EPINEPHRINE OR SIMILAR DRUGS.

=======================  First Aid Measures  =======================

First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHNG
    DIFF GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN:WASH
    W/SOAP & WATER. RMV CONTAM CLTHG & SHOES. INGEST:DO NOT INDUCE
    VOMIT. NOTHG BY  MOUTH IF UNCONSC. GET MEDICAL ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:<20F/-7C
Lower Limits:7.1
Upper Limits:1.2
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM
Fire Fighting Procedures:AEROSOL CANS PRESENT EXPLOSION HAZARD.
Unusual Fire/Explosion Hazard:FLASHBACK ALONG VAPOR TRAIL MAY OCCUR;
    VAP MAY EXPL. IF IGNITED IN AN ENCLOSED AREA.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA AND REMOVE ALL IGNITION
    SOURCES. ABSORB ON INERT MATERIAL AND PLACE IN COVERED CONTAINERS.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED AREA
    PROTECT FROM DAMAGE,DIRECT SUNLIGHT, OR TEMPERATURE OVER 120F. DO
    NOT USE NEAR FIRE OR FLAME, OR WHILE SMOKING
Other Precautions:DELIBERATELY CONCENTRATING AND BREATHING VAPORS MAY
    BE HARMFUL OR FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:MECHANICAL-CHEMICAL FILTER RESPIRATOR OR SCBA PR
    29CFR 1910.134
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN <TLV
Protective Gloves:POLYETHYLENE OR NEOPRENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SEE 29CFR1910.132 AND .133
Work Hygienic Practices:USE NORMAL SPRAY PAINTING PERSONAL HYGIENE
    PRACTICE.
Supplemental Safety and Health
PER MFR: THIS IS A MINOR FORMULATION CHANGE EFFECTIVE DATE OF MSDS
    REVISION.

==================  Physical/Chemical Properties  ==================

HCC:V3
Vapor Pres:40-50 PSIG
Vapor Density:>1
Spec Gravity:>2
Evaporation Rate &amp; Reference:<1 ETET
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY PAINT, AROMATIC ODOR
Percent Volatiles by Volume:53%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, ALKALIS, WATER.
Stability Condition to Avoid:STORAGE ABOVE 120F/50C OR IN SUNLIGHT
Hazardous Decomposition Products:INCOMPLETELY BURNED CARBON PRODUCTS,
    CO*2, CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL OR INCINERATE I/A/W FEDERAL,STATE,LOCAL
    REGULATIONS*NOTE* DO NOT PUNCTURE OR INCINERATE CONTAINERS. FULL OR
    PARTIALLY FILLED CONTAINERS ARE HAZARDOUS WASTE. COMPLETELY EMPTY
    (LIQUID AND GAS)  MAY BE DISPOSED THROUGH NORMAL CHANNELS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.