SINCLAIR PAINT CO -- AQUA SATIN WHITE, 4000 -- 8030-00N028125
===================== Product Identification ===================== Product ID:AQUA SATIN WHITE, 4000 MSDS Date:03/09/1990 FSC:8030 NIIN:00N028125 === Responsible Party === Company Name:SINCLAIR PAINT CO Address:6100 SOUTH GARFIELD AVE City:LOS ANGELES State:CA ZIP:90040 Country:US Info Phone Num:213-888-8888 Emergency Phone Num:213-664-2121 Preparer's Name:J. G. PRINZ CAGE:45281 === Contractor Identification === Company Name:SINCLAIR PAINT CO Address:6100 SOUTH DORFIELD AVE Box:City:LOS ANGELES State:CA ZIP:90040 Country:US Phone:213-888-8888 CAGE:45281 ============= Composition/Information on Ingredients ============= Ingred Name:1,2-PROPANE DIOL; (PROPYLENE GLYCOL). VP:0.2 @ 68F. CAS:57-55-6 RTECS #:TY2000000 Fraction by Wt: 5% ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:INHAL: ADVERSE HLTH EFTS FROM VAPS/SPRAY MISTS IN POORLY VENT AREAS MAY INCL IRRIT OF MUC MEMB OF THE NOSE, THROAT, & RESP TRACT & SYMP OF HDCH & NAUS. EYES: INDIRECT CNTCT MAY CAUSE IRRIT. SKIN: PRLN GD & RPTD CNTCT W/PROD MAY CAUSE SKIN IRRIT. SKIN ABSORP: REDNESS, DRYING OF SKIN/OTHER SIGNS OF IRRIT(EFTS OF OVEREXP) Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:HLTH HAZ: OR CONTACT DERM. INGEST: CAN CAUSE GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING, AND DIARRHEA. ACUTE: MAY CAUSE IRRITATION TO SKIN, EYES, AND INTESTINAL SYSTEM. CHRONIC: NONE KNOWN. Medical Cond Aggravated by Exposure:NONE. ======================= First Aid Measures ======================= First Aid:SKIN: CLEANSE WITH SOAP & WATER. REMOVE ALL CONTAMINATED CLOTHING. EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN. TAKE TO A PHYSICIAN FOR MEDICAL ATTENTION. INHAL: REMOVE TO FRESH AIR. INGEST: DRINK 1-8 GLASSES OFWATER TO DILUTE. DO NOT INDUCE VOMITING. CONSULT A PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY. TREAT SYMPTOMATICALLY. ===================== Fire Fighting Measures ===================== Lower Limits:2.6 % Upper Limits:12.6 % Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG. Fire Fighting Procedures:THIS IS A WATER-BASED COATING. WILL NOT SUPPORT COMBUSTION. WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HIGH TEMPERATURES MAY EXPLODE OR BURST DUE TO BUILD UP OF STEAM PRESSURE. ================== Accidental Release Measures ================== Spill Release Procedures:DIKE, CONTAIN, OR ABSORB WITH INERT MATERIAL. TRANSFER TO CONTAINERS FOR RECOVERY OR DISPOSAL. PREVENT RUNOFF INTO SEWERS, STREAMS, OR OTHER BODIES OF WATER. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT EXPOSE TO EXTREMES IN TEMPERATURES. AVOID EXPOSURE TO HIGH TEMPERATURES. DO NOT ALLOW TO FREEZE. Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED EXPOSURE TO LEVELS ABOVE TLV. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT NORMALLY REQUIRED. IF TLV EXCEEDED USE NIOSH/MSHA APPROVED ORGANIC VAPOR AND MIST PROTECTION. Ventilation:USE ADEQUATE MECHANICAL (GENERAL AND/OR LOCAL) VENT TO MAINTAIN EXPOS BELOW TLV. Protective Gloves:RESISTANT GLOVES SUCH AS POLYETHYLENE. Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:WEAR IMPERVIOUS CLOTHING. FURNISH EYEWASH STATIONS. Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS. REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:N1 Boiling Pt:B.P. Text:212F,100C Vapor Pres:SEE INGRED Vapor Density:LTR/AIR Spec Gravity:1.3 Evaporation Rate & Reference:SLOWER THAN ETHER Solubility in Water:COMPLETELY Appearance and Odor:TYPICAL FOR WATER BASED LATEX COATING. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES AVOID CONTACT WITH STRONG OXIDIZING AGENTS. Stability Condition to Avoid:NONE Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON DIOXIDE, CARBON MONOXIDE, ETC. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE OR FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.