WAGNER SPRAY TECH -- HYDRAULIC FLUID -- 9150-00N027649
===================== Product Identification ===================== Product ID:HYDRAULIC FLUID MSDS Date:12/09/1991 FSC:9150 NIIN:00N027649 === Responsible Party === Company Name:WAGNER SPRAY TECH Address:1770 FERNBROOK LANE City:PLYMOUTH State:MN ZIP:55441 Country:US Info Phone Num:612-553-7000 Emergency Phone Num:612-553-7000 CAGE:53109 === Contractor Identification === Company Name:WAGNER SPRAY TECH Address:1770 FERNBROOK LANE Box:City:PLYMOUTH State:MN ZIP:55441 Country:US Phone:612-553-7000 CAGE:53109 ============= Composition/Information on Ingredients ============= Ingred Name:HYDRAULIC OIL OSHA PEL:5 MG/M3 ACGIH TLV:5 MG/M3;10MG/M3 STEL ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:NONE, IF EXPOSURES ARE WITHIN PERMISSABLE RANGE. CONCENTRATIONS: 5 MG/M3 FOR MINERAL OIL MIST OVER 8 HOURS. (ACGIH, 1983). Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYES: AS W/MOST FOREIGN MATERIALS, SHOULD EYE CONTACT OCCUR, FLUSH W/WATER FOR A MINIMUM OF 15 MINUTES. SKIN: WASH EXPOSED AREAS W/PLENTY OF SOAP & WATER. INGEST: CALL MD IMMEDIATELY . INHAL: RE MOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) . ===================== Fire Fighting Measures ===================== Flash Point Method:COC Flash Point:400F,204C Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM OR CARBON DIOXIDE. Fire Fighting Procedures:WATER OR FOAM MAY CAUSE FROTHING. USE WATER TO COOL FIRE-EXPOSED CONTR & DISPERSE VAPORS. WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:NONE. ================== Accidental Release Measures ================== Spill Release Procedures:STOP AND CONTAIN SPILL IF POSSIBLE. WIPE UP OR ABSORB ON A SUITABLE MATERIAL AND SHOVEL UP. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:EXPOSURE TO PROLONGED HIGH TEMPERATURES SHOULD BE AVOIDED. Other Precautions:NONE. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT REQUIRED. IF EXPOSURE LIMITS ARE EXCEEDED, USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN . Ventilation:LOCAL EXHAUST: NORMAL. Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health WASTE DISP METH: FEDERAL, STATE, AND LOCAL REGULATIONS . ================== Physical/Chemical Properties ================== HCC:V6 Spec Gravity:0.8735 Appearance and Odor:PALE LIQUID. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES Hazardous Decomposition Products:NONE. ==================== Disposal Considerations ==================== Waste Disposal Methods:UNDER RCRA, IT IS THE RESPONSIBILITY OF USER OF PRODS TO DETERMINE, AT THE TIME OF DISPOSAL WHETHER PROD MEETS CRITERIA FOR HAZ WASTE. THIS PROD DOES NOT MEET CRITERIA FOR HAZ WASTE IF DISPOSED IN PUR CHASED FORM. DISPOSAL MUST BE I/A/W (SUPP DATA) Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.