3M GENERAL OFFICES -- ADHESIVE  -- 8040-01-294-2625
<pre>=====================  Product Identification  =====================

Product ID:ADHESIVE
MSDS Date:04/06/1998
FSC:8040
NIIN:01-294-2625
Status Code:A
=== Responsible Party ===
Company Name:3M GENERAL OFFICES
Address:3M CENTER
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:651-737-6501/1-800-364-3577
Emergency Phone Num:999-999-9999
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:04963
=== Contractor Identification ===
Company Name:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963

=============  Composition/Information on Ingredients  =============

Ingred Name:EPOXY RESIN
CAS:1675-54-3
Code:F
RTECS #:TX3800000
Minumum % Wt:10.
Maxumum % Wt:30.

Ingred Name:DICYANDIAMIDE
CAS:461-58-5
RTECS #:ME9950000
Minumum % Wt:3.
Maxumum % Wt:7.

Ingred Name:DIMETHYLUREA
CAS:17526-94-2
Minumum % Wt:.5
Maxumum % Wt:1.5

Ingred Name:1,4-BIS.(.(2,3-EPOXYPROPOXY)METHYL.).CYCLOHEXANE
CAS:14228-73-0
= Wt:1.5

Ingred Name:DIALKYL AMINE/PHENOLIC EPOXY RESINS/ POLYHALOEPOXY
Minumum % Wt:40.
Maxumum % Wt:70.

Ingred Name:EPOXY RESIN
CAS:25068-38-6
Code:F
RTECS #:CE6880000
Minumum % Wt:3.
Maxumum % Wt:7.

Ingred Name:NON-VOLATILE AMIDE TRADE SECRET
Minumum % Wt:.5
Maxumum % Wt:1.5

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:MILD EYE IRRITATION: SIGNS/SYMPTOMS
    CAN INCLUDE REDNESS, SWELLING, PAIN, AND TEARING. SKIN CONTACT:
    ALLERGIC SKIN REACTION: SIGNS/SYMPTOMS CAN INCLUDE REDNESS,
    SWELLING, BLISTERING, AND ITCHING. INHAL ATION: VAPORS OF HEATED
    MATERIAL MAY CAUSE RESPIRATORY SYSTEM IRRITATION. INGESTION MAY
    CAUSE: IRRITATION OF GASTROINTESTINAL TISSUES: SIGNS/SYMPTOMS CAN
    INCLUDE PAIN, VOMITING, ABDOMINAL TENDERNESS,N AUSEA, BLOOD IN
    VOMITUS, AND BLOOD IN FECES.
Medical Cond Aggravated by Exposure:

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: IMMEDIATELY FLUSH EYES WITH LARGE AMOUNTS OF
    WATER. SKIN CONTACT: FLUSH SKIN WITH LARGE AMOUNTS OF WATER.
    INHALATION: IF SIGNS/SYMPTOMS OCCUR, REMOVE PERSON TO FRESH AIR.IF
    SWALLOWED: DO  NOT INDUCE VOMITING. DRINK TWO GLASSES OF WATER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING, INCLUDING
    HELMENT, SELF-CONTAINED, POSITIVE PRESSURE OR PRESSURE DEMAND
    BREATHING APPARATUS, BUNKER COAT AND PANTS, BANDS AROUND ARMS,
    WAIST AND LEGS, FACE MASK, AND PRO TECTIVE COVERING FOR EXPOSED
    AREAS OF THE HEAD.
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:OBSERVE PRECAUTIONS FROM OTHER SECTIONS.
    COLLECT SPILLED MATERIAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AT TEMPERATURES BELOW 0 DEG. F
    (-18 DEG. C ). ALLOW MATERIAL TO RETURN TO ROOM TEMPERATURE BEFORE
    USE. KEEP OUT OF THE REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AVOID BREATHING OF VAPORS CREATED DURING THE
    CURE CYCLE. AVOID BREATHING OF DUST CREATED BY CUTTING, SANDING OR
    GRINDING.
Ventilation:USE WITH APPROPRIATE LOACL EXHAUST VENTILATION.
Protective Gloves:WEAR APPROPRIATE GLOVES WHEN	HANDLING THIS MATERIAL.
Eye Protection:WEAR VENTED GOGGLES. WEAR SAFETY GLASSES WITH SIDE
    SHIELDS.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.53 WATER=1
Solubility in Water:NOT SOLUBLE
Appearance and Odor:FILM, UNSUPPORTED SOLID FILM, ODORLESS.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID CURING LARGE QUNTITIES OF MATERIAL
    TO PREVENT A PREMATURE REACTION (EXOTHERM) WITH PRODUCTION OF
    INTENSE HEAT AND SMOKE.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE,
    OXIDES OF NITROGEN, HYDROGEN BROMIDE, TOXIC VAPORS, GASES OR
    PARTICULATES   TRACE AMOUNTS OF BROMINE.
Conditions to Avoid Polymerization:MAY OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE UNCURED WASTE IN AN INDUSTRIAL OR
    COMMERCIAL INCINERATOR. DISPOSE OF COMPLETELY CURED (OR
    POLYMERIZED) MATERIAL IN A SANITARY LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.