POLY RESEARCH CORPORATION -- AMMONIUM HYDROXIDE -- 6810-01-018-6726
===================== Product Identification ===================== Product ID:AMMONIUM HYDROXIDE MSDS Date:03/23/1993 FSC:6810 NIIN:01-018-6726 === Responsible Party === Company Name:POLY RESEARCH CORPORATION Address:125 CORPORATE DRIVE City:HOLTSVILLE State:NY ZIP:11742 Country:US Info Phone Num:516-758-0460 Emergency Phone Num:516-758-0460 CAGE:64713 === Contractor Identification === Company Name:POLY RESEARCH CORP Address:125 CORPORATE DR Box:City:HOLTSVILLE State:NY ZIP:11742 Country:US CAGE:5F238 Company Name:POLY RESEARCH CORPORATION Address:125 CORPORATE DRIVE Box:City:HOLTSVILLE State:NY ZIP:11742-2007 Country:US Phone:516-758-0460 CAGE:64713 ============= Composition/Information on Ingredients ============= Ingred Name:AMMONIUM HYDROXIDE (SARA III) CAS:1336-21-6 RTECS #:BQ9625000 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYES: PROLONGED EYE CONTACT MAY CAUSE PERMANENT DAMAGE TO THE CORNEA AND BLINDNESS MAY OCCUR. SKIN CONTACT: MAY CAUSE SEVERE IRRITATION OR BURNS. INHALATION: INHALATION OF VAPORS MAY CAUSE SEVERE IRRI TATION OR BURNS OF THE RESPIRATORY SYSTEM, PULMONARY EDEMA OR LUNG INFLAMMATION. INGESTION: MAY BE FATAL, HARMFUL. Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER. Effects of Overexposure:SEE HEALTH HAZARD. MANUFACTURER MADE NO STATEMENT ON EFFECTS OF REPEATED OVEREXPOSURE. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYES: IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR 15 MINUTES. CALL A PHYSICIAN. SKIN: FLUSH SKIN WITH PLENTY OF WATER FOR 15 MINUTES. REMOVE CONTAMINATED CLOTHING AND SHOES. CALL A PHYSICIAN. INHA LATION: REMOVE TO FRESH AIR. CALL A PHYSICIAN. GIVE OXYGEN IF BREATHING IS DIFFICULT. INGESTION: DO NOT INDUCE VOMITING. IF CONSCIOUS GIVE LARGE AMOUNTS OF WATER. ===================== Fire Fighting Measures ===================== Flash Point:NONE Extinguishing Media:WATER SPRAY Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA WITH FULL FACEPIECE OPERATED IN A PRESSURE DEMAND OR OTHER POSITIVE PRESSURE MODE. DO NOT GET WATER IN CONTAINERS Unusual Fire/Explosion Hazard:EXTREMELY PUGENT ODOR-CORROSIVE MATERIAL. GIVES OFF FLAMMABLE VAPORS, VAPORS MAY FORM EXPLOSIVE MIXTURE WITH AIR. CLOSED CONTAINERS EXPOSED TO HEAT MAY EXPLODE. ================== Accidental Release Measures ================== Spill Release Procedures:WEAR SELF CONTAINED BREATHING APPARATUS AND PROTECTIVE CLOTHING. STOP LEAK IF IT CAN BE DONE WITH OUT RISK. VENTILATE AREA. CAREFULLY NEUTRALIZE SPILL WITH DILUTE HYDROCHLORIC ACID. FLUSH AREA WITH FL OODING AMOUNTS OF WATER. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE IN CORROSIVE-PROOF AREA. STORE BELOW 25C. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:RESPIRATORY PROTECTION IS REQUIRED IF AIRBORNE CONCENTRATION EXCEEDS TLV. AT CONCENTRATIONS UP TO 25 PPM, A CHEMICAL CARTRIDGE RESPIRATOR WITH AMMONIA/AMINE CARTRIDGE AND DUST/MIST FILTER IS RECOMMEND ED. ABOVE THIS LEVEL, SCBA IS ADVISED. Ventilation:GENERAL OR LOCAL EXHAUST VENTILATION. Protective Gloves:RUBBER Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS Other Protective Equipment:EYE BATH & EMERGENCY SHOWER. APRON OR CLOTHING TO PROTECT SKIN. FACE SHIELD Work Hygienic Practices:WASH AFTER USE. Supplemental Safety and Health NONE ================== Physical/Chemical Properties ================== HCC:B1 Boiling Pt:B.P. Text:83.0F,28.3C Melt/Freeze Pt:M.P/F.P Text:-108F,-78C Vapor Pres:720 @ 80F Vapor Density:1.2 (AIR=1 Spec Gravity:0.90 Solubility in Water:COMPLETE Appearance and Odor:STRONG, ACRID, SUFFOCATING ODOR Percent Volatiles by Volume:100 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG ACIDS, STRONG OXIDIZING MATERIALS, FOOD PRODUCTS, DIMETHYL SULFATE, BRASS, BRONZ. Stability Condition to Avoid:HEAT Hazardous Decomposition Products:AMMONIA GAS ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND FEDERAL ENVIRONMENTAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.