DRACKETT PRODUCTS COMPANY -- MR MUSCLE OVEN CLEANER  -- 7930-00B040013
<pre>=====================  Product Identification  =====================

Product ID:MR MUSCLE OVEN CLEANER
MSDS Date:10/30/1985
FSC:7930
NIIN:00B040013
=== Responsible Party ===
Company Name:DRACKETT PRODUCTS COMPANY
City:CINCINNATI
State:OH
ZIP:45232-1988
Country:US
Emergency Phone Num:513-632-1500
CAGE:45232
=== Contractor Identification ===
Company Name:DRACKETT PRODUCTS COMPANY
Box:City:CINCINNATI
State:OH
ZIP:45232-1988
Country:US
CAGE:45232

=============  Composition/Information on Ingredients  =============

Ingred Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293

Ingred Name:PROPELLANT BLEND
OSHA PEL:1400 MG/CU.M.

Ingred Name:ETHANOLAMINE
CAS:141-43-5
RTECS #:KJ5775000
OSHA PEL:3 PPM/6 STEL
ACGIH TLV:3 PPM/6 STEL; 9192

Ingred Name:SODIUM HYDROXIDE  (SARA III)
CAS:1310-73-2
RTECS #:WB4900000
OSHA PEL:2 MG/M3
ACGIH TLV:C 2 MG/M3; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Effects of Overexposure:HARMFUL IF SWALLOWED CAUSES BURNS TO SKIN AND
    EYES.

=======================  First Aid Measures  =======================

First Aid:INTERNAL:RAPIDLY RINSE MOUTH THEN IMMEDIATELY DRINK A
    GLASSFUL OF MILK OR WATER,DO NOT INDUCE VOMITING.EYES:RINSE
    IMMEDIATELY WITH WATER,REMOVE CONTACT LENSES,THEN FLUSH EYES WITH
    WATER FOR 15 MINS.SK IN:REMOVE AFFECTED CLOTHING.FLUSH WITH WATER
    FOR 15 MIN TO REMOVE ALL TRACES OF PRODUCT.CALL PHYSICIAN OR POISON
    CONTROL

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:<-100
Extinguishing Media:DRY CHEMICAL,WATER,CARBON DIOXIDE OR AFF FOAM
Fire Fighting Procedures:KEEP CONTAINERS COOL WITH FOG STREAM.USE
    SHIELDING TO PROTECT PERSONNEL AGAINST BURSTING OR VENTING
    CONTAINERS.
Unusual Fire/Explosion Hazard:CONTAINERS MAY VENT OR BURST AT TEMPS
    ABOVE 130 F

==================  Accidental Release Measures  ==================

Spill Release Procedures:AEROSOL: REMOVE IGNITION SOURCES.SOAK UP SPILL
    WITH ABSORBENT MATERIAL AND COLLECT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CONTENTS UNDER PRESSURE.DO NOT
    PUNCTURE OR INCINERATE CONTAINERS.KEEP OR STORE IN DRY PLACE.

=============  Exposure Controls/Personal Protection  =============

Ventilation:AVOID BUILDUP OF CAUSTIC MIST
Protective Gloves:RUBBER:AVOID SKIN CONTACT
Eye Protection:GOGGLES
Other Protective Equipment:RUBBER OR OTHER IMPERVIOUS GARMENTS
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:> 212 F
Vapor Pres:18 HG@68 F
Vapor Density:> 1
Spec Gravity:1.06
Evaporation Rate &amp; Reference:WATER=1 /> .1
Solubility in Water:90
Appearance and Odor:VISCOUS MILKY LIQUID WITH SLIGHT CITRUS ODOR
Percent Volatiles by Volume:94

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE CONTAINERS.FOLLOW
    LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.