PHARMCO PRODUCTS INC -- ISOPROPYL ALCOHOL -- 6810-00-753-4993
===================== Product Identification ===================== Product ID:ISOPROPYL ALCOHOL MSDS Date:06/01/1995 FSC:6810 NIIN:00-753-4993 === Responsible Party === Company Name:PHARMCO PRODUCTS INC Address:58 VALE RD City:BROOKFIELD State:CT ZIP:06804 Country:US Info Phone Num:203-740-3471 Emergency Phone Num:203-740-3471 800-424-9300(CHEMTREC) CAGE:69267 === Contractor Identification === Company Name:PHARMCO PRODUCTS INC. Address:58 VALE ROAD Box:City:BROOKFIELD State:CT ZIP:06804-3967 Country:US Phone:203-740-3471 CAGE:69267 ============= Composition/Information on Ingredients ============= Ingred Name:ISOPROPYL ALCOHOL (SARA III) CAS:67-63-0 RTECS #:NT8050000 Fraction by Wt: 99-100% Other REC Limits:NONE RECOMMENDED OSHA PEL:400 PPM ACGIH TLV:400 PPM/500STEL;9394 ===================== Hazards Identification ===================== LD50 LC50 Mixture:ORAL LD50 (RAT) = 5840 MG/KG Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYES:MAY CAUSE IRRITATION. SKIN:MAY CAUSE IRRITATION. INGESTION:MAY CAUSE GI TRACT IRRITATION AND CNS DEPRESSION. INHALATION: MAY CAUSE RESPIRATORY IRRITATION. Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS ABOVE 0.1% WHICH ARE IDENTIFIED AS CARCINOGENS BY NTP,IARC OR OSHA. Effects of Overexposure:INGESTION: HEADACHE, NAUSEA, VOMITING, DIZZINESS, GI TRACT IRRITATION, NARCOSIS, UNCONSCIOUSNESS. INHALATION: RESPIRATORY TRACT IRRITATION, CHEST PAIN, COUGHING. EYES: IRRITATION, STINGING, EXCESSIVE REDNESS. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYES: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES. FLUSH UNDER LIDS BY LIFTING THEM OR ROLLING EYES. SEE DOCTOR ASAP. SKIN: FLUSH WITH WATER. REMOVE CLOTHING AND CONTINUE FLUSHING. INHALATION : REMOVE TO FRESH AIR AND RESTORE BREATHING. GET MEDICAL HELP. INGESTION: DO NOT INDUCE VOMITING. DILUTE. GET PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:51.8F,11.0C Autoignition Temp:Autoignition Temp Text:750F Lower Limits:2.0% Upper Limits:12.0 % Extinguishing Media:USE CARBON DIOXIDE, ALCOHOL FOAM, WATER SPRAY OR DRY CHEMICAL. Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED CONTAINERS WITH WATER SPRAY. Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS. VAPORS HEAVIER THAN AIR, CAN TRAVEL ALONG GROUND AND FLASHBACK. ================== Accidental Release Measures ================== Spill Release Procedures:SMALL SPILLS CAN BE FLUSHED AWAY WITH WATER. VENTILATE. ELIMINATE IGNITION SOURCES. ABSORB MATERIAL WITH CLAY, VERMICULITE, OR SIMILAR ABSORBENT MATERIAL. PLACE IN DISPOSAL CONTAINERS. FLUSH AREA WITH WATER. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND FLAME. AVOID CONTACT WITH EYES. KEEP CONTAINER CLOSED. USE WITH ADEQUATE VENTILATION. GROUND CONTAINER WHEN TRANSFERNG Other Precautions:VAPORS MAY COLLECT IN CONTAINER. TREAT EMPTY CONTAINERS AS HAZARDOUS. SUDDEN RELEASE OF HOT ORGANCIC CHEMICAL VAPORS OR MISTS FROM PROCESS EQUIPMENT OPERATING AT ELEVATED TEMPS MAY RESULT IN IGNITION WITHOUT AN IGNITION SOURCE. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WHERE ENVIRONMENTAL CONTROLS ARE LACKING OR IN ENCLOSED SPACES USE A SELF-CONTAINED BREATHING APPARATUS. Ventilation:USE LOCAL EXHAUST. AVOID OPEN ELECTRICAL SOURCES NEAR PRODUCT VAPOR AREAS. Protective Gloves:NEOPRENE, NITRILE, OR POLYVINYL ALCOHOL Eye Protection:USE CHEMICAL SAFETY GOGGLES & FACESHIELD Other Protective Equipment:PROVIDE A LOCAL EYE WASH STATION AND SAFETY SHOWER. Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:F2 Boiling Pt:B.P. Text:180F,82C Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN Vapor Pres:33 Vapor Density:2.1 Spec Gravity:.79 Evaporation Rate & Reference:2.5 (BUTYL ACETATE = 1) Solubility in Water:COMPLETE Appearance and Odor:TRANSPARENT, COLORLESS LIQUID, CHARACTERISTIC ODOR Percent Volatiles by Volume:100 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS, ALUMINUM, STRONG ACIDS, HALOGENS, AMINES, AMMONIA, ALDEHYDES Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES OF IGNITION Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF ALL WASTE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS. INCINERATION IS RECOMMENDED. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.