DARCO SOUTHERN INC -- DAP 33 GLAZING COMPOUND  -- 8030-00-262-1062
<pre>=====================  Product Identification  =====================

Product ID:DAP 33 GLAZING COMPOUND
MSDS Date:01/01/1985
FSC:8030
NIIN:00-262-1062
=== Responsible Party ===
Company Name:DARCO SOUTHERN INC
Address:253 DARCO DRIVE
Box:454
City:INDEPENDENCE
State:VA
ZIP:24348
Country:US
Info Phone Num:703-773-2711
Emergency Phone Num:703-773-2711
CAGE:3N264
=== Contractor Identification ===
Company Name:DAP INC.
Box:277
City:DAYTON
State:OH
ZIP:45401-0277
Country:US
Phone:513-253-7154/800-543-3840
CAGE:90300
Company Name:DARCO SOUTHERN INC
Address:253 DARCO DRIVE
Box:454
City:INDEPENDENCE
State:VA
ZIP:24348
Country:US
Phone:703-773-2711
CAGE:3N264

=============  Composition/Information on Ingredients  =============

Ingred Name:PIGMENTS (% UNKNOWN)

Ingred Name:SYNTHETIC OILS  (% UNKNOWN)

Ingred Name:VEGETABLE OIL
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 MISTS; 9293

Ingred Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 0.70%
OSHA PEL:100 PPM

=======================  First Aid Measures  =======================

First Aid:EYE:IMMEDIATELY FLUSH W/WATER AT LEAST 15 MIN. CALL MD IF
    NECESSARY. SKIN: WASH THOROUGHLY WITH SOAP AND WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:104F TCC
Lower Limits:1.1
Upper Limits:6.0
Extinguishing Media:CO*2 OR DRY CHEMICALS
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:DO NOT PUT IN CONTACT W/OXIDIZING
    MATERIALS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SPILLED MATERIAL CAN BE SCRAPED UP OR WIPED UP
    AND DISCARDED.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY AREA AWAY FROM
    UNNECESSARY EXPOSURE TO HEAT.

=============  Exposure Controls/Personal Protection  =============

Supplemental Safety and Health
SPECIFIC GRAVITY IS MEASURED AT 60F.FLASH PT. ASTM D-56 104 TCC
    MAX.ALLOWABLE CONCENTRATION IS 500 PPM MAX. SOLVENT IS 0.70% OF
    TOTAL COMPOUND.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:EP 390F
Vapor Pres:1
Vapor Density:3.9
Spec Gravity:0.77
Evaporation Rate &amp; Reference:0.15 BUAC
Solubility in Water:NEGLIGIBLE
Percent Volatiles by Volume:1.9

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRE OR OPEN FLAME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DRIED MATERIAL IS NON-HAZARDOUS AND CAN BE
    DISPOSED OF IN ANY CONVENIENT WAY. (MFG REC)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.